Diverter Valves

Ideal for handling dry bulk material in gravity flow, dilute phase or dense phase pneumatic conveying applications. Diverter valves are flow direct bulk material into 2 or more different destinations. Enge Plas’ range of diverters are designed and engineered to extend the service life of the valve and perform maintenance without taking the valve out of line.

Our valves serve many industries including chemical, cement, coal, food, frac sand, grain, minerals, petrochemical, pharmaceutical, plastics, polymer, rubber and mining.

We supply certified solutions for requirements regarding flameproof design and ATEX conformity.

Wye Line Diverter

To handle dry bulk solids in vacuum or dilute phase pneumatic conveying systems with pressures up to 1 bar
A full flow orifice provides unrestricted conveying of material
Positive seal through closed port

Seal Tite Diverter

For use in gravity flow applications where material can be diverted from one source to either two or three destinations
Leading edge of blade protected from material flow
Internal access without tools

Flex Tube Diverter

Eliminates material cross contamination through a positive seal across the closed port.
No pinch points or exposed moving parts for safe operation

Aggregate Diverter

For demanding handling of material such as sand, gravel, whole grains, and coal
Optional replaceable abrasion resistant liners
Heavy-duty bucket that addressees material impact and wear
Bucket seals reduce interior dusting

TLD Diverter

For use in gravity flow applications handling abrasive materials such as coal and frac sand
Leading edge of blade protected from material flow

Gravity Vee Diverter

To divert dry bulk solids in a gravity flow conveying system.
Allows for material flow through both outlets simultaneously, one outlet at a time, or a complete shut-off of flow
Seals protected from material flow stream

Multi-Port Diverter

Multi-port design eliminates the need for complicated hose manifold stations.
Helps address potential errors when manually switching hoses and greatly reduces safety hazards
Mechanically self-cleans on opening stroke

Pivoting Chute Diverter

To handle abrasive materials in gravity flow applications.
Body houses an internal chute constructed of abrasive-resistant metal or lined with optional material that offers superior wear resistance
Dust tight to atmosphere

‍

No items found.

Gate Valve

Gate valves are ideal for handling dry bulk material in gravity flow, dilute phase or dense phase pneumatic conveying applications. They are available in a wide variety of configurations including size and customer specific hole patterns. Enge Plas provide a solution here for you specifically engineered to handle dry bulk powders, pellets and granules.

Diverse Range

Orifice Gate

Handles dry bulk solids in gravity flow, dilute phase, or vacuum conveying systems with pressures up to 1 bar
Mechanically self cleans on opening stroke
Seals protected from material flow stream

Roller Gate

Best choice for handling dry material in gravity flow or low-pressure applications
Positive seal of dust and fine powders

HDPV2 Gate

Address higher-pressure applications up to 5 bar
Seals fine material in higher aeration or pressure applications
Patented rising blade action ensures optimal seal
Seals protected from blast abrasion
Does not pack material upon closure

TSG Gate

For the most demanding applications when handling heavy-duty abrasive materials such as sand, gravel, coal, and whole grains in gravity flow applications where positive material shut-off and dust tight sealing is required

Titan Pressure Gate Valve

Address higher-pressure applications up to 6.8 bar and higher temperatures up to 350°C, for highly abrasive applications and requires minimal maintenance over the life of the valve
Mounting boss for the addition of an optional proximity switch

Clear Action Gate

For use in gravity flow or pneumatic conveying systems up to 1 bar
Self-cleaning action on closure minimizes material build-up
Positive seal across the valve and to atmosphere
No internal cavities for material to build up

Aggregate Gate

For demanding applications handling material such as sand, gravel, whole grains, and coal
Narrow profile, choice of actuators, and custom rectangular sizes make this slide gate adaptable to most existing installation
Replaceable abrasion resistant liners deflect material away from support rollers
Hardened steel rollers with grease fittings
Material displacement pocket minimizes wedging of material as blade closes

Rounded Blade Gate

For the most demanding applications when handling heavy-duty abrasive materials in gravity flow where positive material shut-off and dust-tight sealing is required
Design allows for rapid actuation to quickly start and stop material flow and makes it a good choice for applications that require metering

Maintenance Gate

Designed to shut off material from a hopper or silo when maintenance of downstream equipment is required
In open position, it positively seals conveying air and material to atmosphere
Hand crank gearing is designed to close through material in case of an upset condition

Hand Slide Orifice Gate

To handle dry bulk solids in gravity flow conveying
Full flow orifice provides unrestricted conveying of material with no disk or ledges to impede flow or cause material bridging

Quick Clean Orifice Gate

Clean out of place” gate valve designed for frequent cleaning
Features a full-port opening and self-cleaning design
Can be disassembled and assembled in minutes without tools
Carries a USDA Dairy Standard Accepted rating and is an excellent choice for sanitary applications

‍

Unlike common knife gates and butterfly valves, our gate valves are specifically engineered to handle dry bulk powders, pellets, and granules.
Knife gates rely on soft elastomeric seals which erode or tear away in service.
Butterfly valves incorporate discs that cause significant flow restrictions, thus impacting system performance and throughput.
Both designs promote wedging and packing of materials, preventing positive air and material shut off.
Our gate valves eliminate design flaws associated with knife gates and butterfly valves.
Serviceable while in-line
Wear compensating hard polymer seals
No pinch points or exposed moving parts for safe operation
Open / closed or volume metering of material
Accurate metering of materials with optional metering controls
Horizontal or vertical valve orientation
CE, ATEX, FDA Certified

‍

No items found.

08. Slides Gates, Diverters, & Loading Spouts

Loading Spouts provide an efficient way to load bulk material into vessels. Vessels can be trucks, railcars, tank vehicles, ships, barges, and stockpiling. They are also used to filling bags, drums and flexible bulk containers. Materials include petrochemical powders, plastic granules, wood pellets, grains, cement, sand or gravel.

Our loading spouts apply in normal, abrasive, corrosive, combustible and hazardous environments. They can capture fugitive dust and prevent material waste. This ensures plant and environmental safety, with low maintenance and service expenses.

Enge Plas offers a complete line of versatile loading systems for any applications. We supply retractable loading spouts attached to the bottom of a silo/hopper. Or located at the end of an air conveying system. Or to the dust collecting filter system or the loading spout positioner. Useful accessories include spout filtration systems, spout positioners and aeration systems.

No items found.

08. Gate Slides, Diverters, & Loading Spouts

Diverter Valves