Samples represent the whole.
When taking samples, a random test is taken from an overall quantity. These samples serve as the basis for the analysis regarding quality assurance. The correct procedure for taking spot samples is therefore a very important subject. Only with representative and authentic samples can reliable information about the quality, properties or composition of a particular material be provided.
Very precise material analyses can be carried out with the most up to-date technology. However, the technology is no good if an error occurs when the sample is taken and this error continues through all phases of the analysis, with the consequence that the final result of the quality check is wrong.
Other Points to be considered when taking a CORRECT Sample
We distribute samplers, sampling systems and accessories for both liquid and bulk solids.
Enge Plas Provides a Wide Range of Laboratory Equipment.
Enge Plas supplies JEL STAV II with its soft design and serves to determine the volume of
a product before and after being stamped by compression and tamped density
in the form of powders, fibres or granules by using various sizes of measuring cylinder.
Our Drum Hoop Mixer serves to mix products in the form of powder or granules. This laboratory mixer can also be used to dye plastics, to mix solid and liquid materials for similar tasks.The drum provides three-dimensional shifting of the material being mixed when the arrangement of the container walls and the rotation is performed. Drum Hoop Mixer Mini which mainly consists of a modern silver metallic plastics housing with a motor-driven roller track and the drum hoop.
The laboratory screening machine serves to analyse particles for dry materials in forms ranging from powder to coarse particles.
By using sieves with different mesh openings respectively perforations, the material sample is almost tolerance-free classified into its grain composition. This test screening machine works according to the plane sieving principle with horizontal vibrations and optimal design based on decades of empirical values.
Automatic Pigment Muller is applied for grinding pasty pigment in laboratories.
The purpose of this process is to determine the consistency, density or coloring power of pigments.
Test series can be carried out with product quantities of 3 to 7 g. It is also possible to test similar products under identical conditions.
Samples represent the whole.
When taking samples, a random test is taken from an overall quantity. These samples serve as the basis for the analysis regarding quality assurance. The correct procedure for taking spot samples is therefore a very important subject. Only with representative and authentic samples can reliable information about the quality, properties or composition of a particular material be provided.
Very precise material analyses can be carried out with the most up to-date technology. However, the technology is no good if an error occurs when the sample is taken and this error continues through all phases of the analysis, with the consequence that the final result of the quality check is wrong.
Other Points to be considered when taking a CORRECT Sample
We distribute samplers, sampling systems and accessories for both liquid and bulk solids.
Enge Plas supplies zone samplers used for taking samples of bulk goods of any kind.
The big advantage of zone samplers is that all-layer samples can be collected from all layers of the container. Various bulk goods can be collected with the lances, from the finest powder to large grains such as corn or nuts.
The zone samplers are available in different lengths. 55 cm (only Multi, Uno and All-layer sampler) especially suitable for sacks, 85 cm long (especially for barrels, tubs, mixed containers) and 150 cm as well as 250 cm (only Jumbo sampler) for big bags, silos, tanks.
Safe and reliable sampling is made even easier with useful special accessories such as sealing sleeves, Quali-Paper, cleaning brushes, emptying devices and close-it control seals. The zone samplers are available in different models for different sampling tasks.
Laboratory pumps are designed to provide easy and safe transfer or dispense virtually any chemical from barrels or containers. Apart from the size and type of them, the required pump capacity and suitability of the pump for the particular medium are important considerations for choosing the right pump. Enge Plas offer a wide range of pump devices and consultancy for your employees priority safety and health conditions which are the right choices to implement your production processes.
Enge Plas supplies zone samplers used for taking samples of bulk goods of any kind.
The big advantage of zone samplers is that all-layer samples can be collected from all layers of the container. Various bulk goods can be collected with the lances, from the finest powder to large grains such as corn or nuts.
Safe and reliable sampling is made even easier with useful special accessories such as sealing sleeves, Quali-Paper, cleaning brushes, emptying devices and close-it control seals. The zone samplers are available in different models for different sampling tasks.