Moisture Sensors

Level Indicator, Controls, Sensors & Switches

Level Sensors provide vital information to process engineers and plant controls as to the level of bulk solids at any given stage of production. This information is then used to either reorder the material, refill the material or to take the next process decision. Depending on the process conditions and characteristics of the bulk solids, we provide suitable level sensors.

Commonly used level sensors are paddle type, capacitance type and tuning fork type. Other types of sensors available are diaphragm type, Tilt Switch etc..

  • Rotary Paddle
  • Fail-Safe Rotary Paddle
  • RF Capacitance
  • Vibratory
  • Tilt Switch
  • Proximity
  • Pressure Sensitive
  • SiloPatrol Weight & Cable-Based Level Measurement
  • RadarRight

  • Adjustable sensitivity
  • Automatically shut off if significantly extend motor life
  • Reduce maintenance costs
  • Competitive price compare to others
  • Hazardous location approvals available
  • Durability of stainless steel probe construction

  • Shaft extensions and shaft guards
  • Oil resistant cover for diaphragm
  • Stainless steel mounting connection
  • Split architecture
  • Food grade probe
  • Hazardous approvals

Flow Sensors

In some gravity or pneumatic conveying applications, it is very critical to measure the flow rate of bulk solids. Mass flow sensors are used in such applications. Enge Plas provide solutions for critical bulk solid processes to detect conditions.

Enge Plas provide a wide range of solutions for flow measurement sensors in pneumatic conveying & free falling processes. Our mass flow measurement sensor is designed with the latest microwave technology for the flow of powders & solids that are conveyed in metallic pipes.

  • Solids flow monitor
  • Solids / Mass flow meter

  • Fast measuring & adjustable sensitivity
  • Meets applicable FCC regulations
  • Sturdy, non-intrusive sensor design to minimise maintenance
  • Easy installation into existing processes

  • Process seal
  • Enclosure for circuit board

Moisture Sensors

Our in-line moisture measurement sensor ensures product quality by measuring the moisture inside the material core. moisture measurements are designed to allow for automation of drying or moisturising at different points in flow processes to minimise energy cost and maximise your profits.

The moisture sensor circuitry principle is centered around an electrical high frequency field that is based on developed and proven technology for several years.

  • Measurement controller & sensor
  • DIN-Rail transmitter & mass flow measurement sensor

  • Automate drying or moisturising processes to minimise energy costs and maximise profit
  • High frequency field technology
  • Compact design for easy installation
  • Providing real-time data to eliminate need for frequent laboratory samples
  • 0.1% - 0.3% moisture precision measurement

  • Power supply & cable

Aeration Pads

The aeration pad is an aeration device used to promote the flow of dry bulk powders from a storage vessel. It operates by continuously introducing air into the body of the dry powder.

When a powder is first conveyed into a storage vessel it is actually a highly aerated mixture of air and particulate. In this state the mixture flows quite readily. However, as the powder settles the solid particulate and air separate resulting in a decrease in volume and an increase in bulk density. In this deaerated state powders can behave more like a single large solid structure rather than a fluid-like mixture. By replacing the naturally lost air, the air to particulate mixture ratio is held thus maintaining the fluid like characteristic of the aerated powder.

  • 1 psi - 4.2 scfm (0.07 bar - 1.2 m3/min)
  • 2 psi - 5.7 scfm (0.14 bar - 1.6 m3/min)
  • 3 psi - 6.5 scfm (0.21 bar - 1.8 m3/min)\
  • 4 psi - 7.1 scfm (0.28 bar - 2.0 m3/min)
  • 5 psi - 7.6 scfm (0.35 bar - 2.2 m3/min)

  • Effective radius of 10 inches (254 mm)
  • Adapts to almost any bin configuration
  • Low cost
  • Easy installation
  • Minimal maintenance

  • External mounting kit

Fluidising Cones

Fluidising cones are pneumatic discharge systems for poor free-flowing powdered bulk materials from silos and hoppers. It is made from FDA-approved rubber and improves the material flow. Fluidising cones are designed to increase the efficiency and rate at which your bulk materials can be discharged.

  • PE (Antistatic)
  • Stainless steel

  • Designed according to bulk material’s properties and operating conditions (flow properties, silo size, storage period, etc.)
  • Prevention of segregation, bridging and funnelling by fluidising and mechanical effects.
  • Operation with air reservoir or pulsator.

  • Flo-Pad
  • Evasser

10. Level & Flow Measurement

Enge Plas offers Electro-pneumatically actuated discharge aid for weighing hoppers, silos etc. Our knockers & vibrators are used for bulk goods with material flow problems as for instant bridge, siphon and residue formations.

  • Electrical control implemented as a separate unit or incorporated into the overall control concept.
  • Robust design, low maintenance.
  • Easy to retrofit.
  • Can be combined with further beaters.

Dust Monitor System

Dust monitor provides reliable economical detectors of leaks and filter failure in powder and bulk solids industries. Enge Plas provide solutions for those that need filter out noise and provide the most accurate dust measurement.

  • Broken Bag Detector / Dust Monitor
  • Dust Emission Trend Monitor

  • Easy set up and calibration
  • Reminder of optimal time to replace filters
  • Monitor cost time, money, material loss, equipment damage and other problem

  • Quick connect mounting kits
  • Solid coupling probe extensions

Polymer Filtration Systems

Enge Plas offers not only Filtration Systems, but also complete solutions, e.g. rheologically optimized melt filter-pump combinations. One focus of our work is the processing technical optimization of the integration of the individual components as well as of the line concept.

We design complete filter systems including in-line-systems for batch processing and duplex continuous systems. For each application, our engineers and customer investigate the optimal filter solution according to the process, installation environment and handling demands.

Film / Sheet

  • Oriented Film
  • Flat & Cast Film
  • Foam Sheet
  • Blown Film


  • Technical Yarn
  • Textile Fiber/Filament
  • Staple Fiber
  • Nonwovens
  • Spandex Manufacture

Semi-Finished Products

  • Pipes
  • Sheet
  • Profiles
  • Tubes


  • Masterbatch


  • Monomer
  • Polymer


  • Recycling in general
  • Pet Bottle Flakes

  • Pump-filter combination to minimise melt dwell time
  • Prevent time consuming for met channels cleaning
  • Flexible filtration system to ensure smooth and even flow
  • Optimise the flow and maximise the filter area
  • Reduce energy consumption to increase operating profits

  • Screen Changers
  • Filter Elements
  • Discharge Valves

Pressure & Temperature Sensors

Pressure transducers operate on the proven principle of strain gauge technology. The pressure is transferred from the measuring diaphragm (which is flushed with the melt channel) via a capillary system to a second diaphragm. The capillary system is filled either with mercury or with a mercury-free medium. The second diaphragm is fitted with a strain gauge. Using the linear change in resistance in relation to deflection, an electric output signal is provided. The special membrane technology guarantees a very long operating life, even under the toughest conditions. The anti-adhesion coating reduces the risk of damage caused by frozen plastic melts.

Our range of temperature sensors features proven thermocouple or resistance temperature measurement systems in a high precision but robust sensor. The Fe-CuNi (type J or L) thermocouples which generate a voltage when heated are well established in the industry due to their advantages thanks to the high Seebeck coefficient. For such applications, type K thermocouples are also available (NiCr-Ni). Additionally, our PT100 (2, 3 or 4-wire) resistance temperature sensors have resistance of 100 Ohm at 0°C which changes with increasing temperature. Conforms to EUROMAP 31.

  • Standardized output signal
  • Integrated amplifier
  • Extremely heavy duty measurement
  • Integrated temperature measurement
  • Integrated amplifier & temperature measurement
  • Heated sensor tip
  • Integrated amplifier & heated sensor tip
  • Explosion-proof
  • Ceramic isolation
  • All-metal design

  • Handling of critical medias such as PC, PMMA or ABS
  • Application areas up to 400 - 500 degree celsius
  • Maximum reliability through new membrane technology
  • Standard G-coating to counteract adhesive materials
  • 100% market compatible
  • Longlife design with patented technology
  • Highly touch design with flexible components

  • Safety systems for protection against over pressure
  • Amplifier (pressure/temperature) – 1 to 3 freely adjustable limit value contacts
  • Accessories – Insert bushing adaptors, pressure simulators, bush fitting tool, blanking plugs, connecting cables & plugs, heater controller system, pressure calibrator

10. Level & Flow Measurement Photo Gallery

Related Procedures